Looking for a panel that is strong but still lightweight? Then Dibond Business Signs (Aluminium) is the product for you! At Helloprint we offer painted aluminium and brushed aluminium signs. Painted Dibond Business Signs (Aluminium)'s are perfect for your shop's front facade because they don't bend and are water-resistant. Brushed Dibond Business Signs (Aluminium)'s have a beautiful silver metallic finish and are often used as unique decoration pieces. Print your metal panels easily online at Helloprint!
Note: Looking to print a photo on aluminium to brighten up your interior? Check our Photo on Aluminium.
|All over single or double sided|
|Quantity||Available from 1 piece|
To allow leeway for cutting differences in production, always add a bleed of 5 mm around all edges of your design. Make sure colours, background pictures and layouts extend into the bleed area so as to avoid leaving white lines as a result of cutting tolerances. You can submit your file with crop marks and printer's marks.
Keep all important text and images at least 10 mm away from the edge of the finished size.
Make sure the resolution of the images and graphics in your artwork are at least 150 dpi.
Prepare your files using CMYK as the colour mode, not RGB. Use colourmode FOGRA39 (ISO Coated v2) for coated papertypes and colourmode FOGRA47 (PSO Uncoated ISO12647) for uncoated papertypes. If you are unsure of the colour mode of your file, don't worry we can always convert this for you. Keep in mind this can cause the colours to differ from the original file.
Save your files in uneditable, print-ready file formats (PDF (1.4 or higher), TIFF, EPS, JPG). Deliver your files in one layer: the background layer.
If you want your product to be cut to a custom shape, you will have to add it as a vector shape on top of your design. Make sure the width of the stroke is 1 pt, the colour is a 100% magenta spot and named "cutcontour". You only need to add one contour line. If you want us to adjust it for you, please send the custom shape on a separate page in the desired position.
Please note that bleed is still needed for custom shaped designs, meaning your design must go at least 5 mm past the contour cut line.
Make sure you convert fonts to outlines or embed all the fonts when saving it to PDF.
With a minimum font size of 20 pt (30 pt for white text) make sure your text is readable.
Make sure no elements in your artwork are set on overprint unless you want this effect in your design. You can read more about overprint in our Help Centre.
|400 x 300 mm|
|Sign - 600 x 400 mm|
|Sign - 800 x 600 mm|
|Sign - 1200 x 800 mm|
|Sign - 594 x 841 mm|
|Sign - 500 x 500 mm|
|Sign - 1000 x 1000 mm|
Dibond Business Signs (Aluminium) are one of our most-sold products and are a high-quality, versatile, promotional material. Print your unique logo or design on Dibond Business Signs (Aluminium) and watch the customers roll in!
This product can be used:
• To introduce people to your business
• Provide information
• Promote at fairs and events
• To represent your company's identity or brand
• Painted Aluminium (Outdoor): This material is lightweight, made out of two synthetic plates with a hard core (Dibond), doesn't bend, and is water-resistant. It is most commonly used for facade signing and promotional signs. Keep in mind that due to shipping limitations, the maximum size is 120 cm x 80 cm.
•Brushed Aluminium (Outdoor): This material has an eye-catching silver metallic finish. It is most commonly used as advertising signs and as wall decorations for buildings or offices. Keep in mind that due to shipping limitations, the maximum size is 120 cm x 80 cm.
• No extra options: A Clean Cut is the standard finish for your advertising panel. Your sign will be cut nicely to the exact size you requested.
This finish has two holes in the upper left and right corners of your advertising panel. Perfect for hanging on your ceiling!
• 4 holes in the corners: Four holes will be drilled in each corner of your clean cut advertising panel. Perfect for wall suspension or hanging!
• Contour cut: Cutting your design on the contour lines gives your sign a great finish. Nearly any shape can be cut, creating a unique look!
Note: Special design formatting required for this finish!
If you wish to use your signs and panels outside, it is best to choose one of the following materials: Trespa, Correx, painted or brushed Aluminium.
The distance between the centre of the hole and the edge of the panel is a standard 8 mm. Keep this in mind when ordering a very small sign, as this could be drilled into the main area of your artwork. For more information regarding your design, see the submission specifications.
The standard diameter of the drilled holes is 5mm.
Yes, they are! We would also recommend our Photo on Aluminium, for a beautiful wall decoration that you can personalise in our editor.
For the production of Dibond Business Signs (Aluminium), we use the following technique(s):
UV-print: The product is printed with eco-friendly UV ink, which is immediately cured with a UV light. Curing ensures that the wet ink doesn't spread once printed, offering sharper quality prints.
• Latex-print: The film is printed with eco-friendly latex inks. These inks are water based and doesn't contain harmful substances. The latex film is very secure and sturdy, and will be placed on top of the material.
All materials are printed directly onto the panel. Except for trespa, where a latex based foil gets printed on the panel.
The fastest possible turnaround for Dibond Business Signs (Aluminium) is:
Please note: Only applicable for products which require your design: To make sure that your order is delivered at the indicated time, it is important that we receive your file with your design for the product, on time (also called cut-off time). This way, the product can be moved into production on time. The deadline is always communicated at the final step when putting your product together and in the box on the right which details your entire order.
The cut-off time for your printed item may vary. This depends on the combination you choose. This has to do with the manufacturing technique and / or the order quantities.
Please note: The product delivery shifts a day every time the deadline for submission has passed. This is also the case if the file is rejected by us and corrected artwork isn't supplied before the next cut-off time.
For the delivery of Dibond Business Signs (Aluminium), we use our most reliable carriers which, in most cases, are UPS or DPD.
We also use DHL and our own courier service. However, these carriers are only used for certain products (depending on the size, the turnaround and the quantity).
The Dibond Business Signs (Aluminium) chosen in most cases can be selected via our website.
If your material type, weight, quantity, size or other specification is not listed, you can request a quotation. We aim to get back to you within 2 working days.
Depending on the complexity, this can take a bit longer.
Access to 10.000+ design templates
Automatically save your designs
Easily access your designs later
Save your design, never lose your design progress
Signing up only takes a minute
Easily access added designs later
Already having an account for Helloprint? Login
If a panel exceeds 100cm on any side, extra production costs will be incurred. However, by choosing a panel that is 99cm, you can avoid these additional costs, reducing both the production expenses and the overall price.
25 cm - 80 cm
25 cm - 120 cm
Your print is larger then 120 x 80 cm. That means we need to divide it into two or more pieces. You can still continue, but wanted to give you heads up about this. If you need our assistance, feel free to request a quote here.
Whoops! 😬 It seems like this size exceeds our limitations. For different sizes, you can request a quote here.
Upload and approve your files before: Wednesday, 6 December 2023 12:30
Want to save the product for later and receive a quote?
Not ready to order yet? Get an instant quote via email to continue later or to send to your colleague or designer to order.
Your quote has been sent!
You will receive the product details within a minute. Take your time to consider it and come back to order with us!
Your sign will be cut to the exact size you request. Without drill holes.
The holes in the upper corner will be positioned 15 mm from the edge and the diameter of the drilled holes is 5 mm. This finish is most preferable for hanging your sign from a ceiling.
The holes in all the corners will be positioned 15 mm from the edge and the diameter of the drilled holes is 5 mm. This finish is most preferable to mount your sign on a wall.
The contour cutting option allows you to create unique shapes for your designs. With this option, you can cut your design to any shape you desire, making it stand out from the crowd. Please note that this feature only allows for one customised shape per item, but multiple cut lines can be requested through a quote.