Bunting Flags

You can download our guides and templates in the template section. Remember to delete the template layers before exporting your design to PDF.

If you already have a design, no worries; we accept other file formats, including JPEG, PNG, or EPS.

For photographic content, high-resolution JPEGs are recommended, preferably without compression. For graphics or text-based content, we recommend print-ready, vector-based PDFs. For content that is a combination of graphics and photography, we suggest using print-ready PDFs to ensure the best quality.

Prepare your files using CMYK as the colour mode, not RGB. Use colourmode FOGRA39 (ISO Coated v2) for coated papertypes and colourmode FOGRA47 (PSO Uncoated ISO12647) for uncoated papertypes. If you are unsure of the colour mode of your file, don't worry we can always convert this for you. Keep in mind this can cause the colours to differ from the original file.

Please note: The material used for a flag is very absorbent therefore the colour can come out lighter than expected. This is especially the case with black. For rich black please use (Cyan 60, Magenta 40, Yellow 40 & Black 100).

Make sure the resolution of the images and graphics in your artwork are at least 150 dpi.

During production, there might be a slight cut deviation. To avoid any issues, we recommend the following:

• Add a 5 mm bleed around all edges of your design.
• Keep important elements 40 mm away from the edge or folding lines.

For this product, the minimum font size is 20 pt. To avoid any issues, we recommend the following:

• Fonts must be embedded or outlined.
• If your design contains small black text, make sure it is 100 % black (Cyan: 0 Magenta: 0 Yellow: 0 Black: 100).

Note that we don't check spelling or typographical errors.

The lines should be at least 3 pt.

Make sure no elements in your artwork are set on overprint unless you want this effect in your design. You can read more about overprint in our Help Centre.