Custom Size Stickers

Submission specifications for Stickers custom size

Add 5 mm bleed.

To allow leeway for cutting differences in production, always add a bleed of 5 mm around all edges of your design. Make sure colours, background pictures and layouts extend into the bleed area so as to avoid leaving white lines as a result of cutting tolerances. You can submit your file with crop marks and printer's marks.

Keep 4 mm safety margin

Keep all important text and images at least 4 mm away from the edge of the finished size. Exclusive finishes need to be within the safety margin.

Resolution of at least 300 dpi.

Make sure the resolution of the images and graphics in your artwork are at least 300 dpi.

Here you can find the customised submission specifications for contour cutting.

If you want your product to be cut to a custom shape, you will have to add it as a vector shape on top of your design. Make sure the width of the stroke is 1 pt, the colour is a 100% magenta spot and named "cutcontour". If you want us to adjust it for you, please send the custom shape on a separate page in the desired position. Please note that bleed is still needed for custom shaped designs, meaning your design must go at least 5 mm past the contour cut line.

Use CMYK as the colour mode.

Prepare your files using CMYK as the colour mode, not RGB. Use colourmode FOGRA39 (ISO Coated v2) for coated papertypes and colourmode FOGRA47 (PSO Uncoated ISO12647) for uncoated papertypes. If you are unsure of the colour mode of your file, don't worry we can always convert this for you. Keep in mind this can cause the colours to differ from the original file.

Save your files in uneditable, print-ready file formats.

Save your files in uneditable, print-ready file formats (PDF (1.4 or higher), TIFF, EPS, JPG). Deliver your files in one layer: the background layer.

Convert fonts to outlines or embed all the fonts.

Make sure you convert fonts to outlines or embed all the fonts when saving it to PDF.

Use the right values for full colour black.

Use Rich Black (C:63% M:52% Y:51% K:100%) for larger areas and text to get a deep black colour. Do not use this value for text smaller than 15 pt or plain text. This can only be used in full colour printing. For designing black smaller texts use 100% black.

Make sure the ink coverage isn't higher than 300%.

Force Color Images to CMYK with a 260% ink limit (in Photoshop > Convert Color Profile > Photoshop 5 Default CMYK). Make sure the ink coverage isn't higher than 300%.

Check line thickness.

Lines should be at least 0.25 pt. Negative lines should be at least 0.5 pt.

Check your artwork for overprint.

Make sure no elements in your artwork are set on overprint unless you want this effect in your design. You can read more about overprint in our Help Centre.

White will not be printed.

If you choose a transparent material, the entire design will be translucid and semi see-through. White areas in your design will be transparent.

Frequently Asked Questions for Stickers custom size

What is this product exactly? And what can I use it for?

• Stickers are one of our most sold products and are very popular as a promotion material. A sticker is comparable to a flyer, the difference is that you can stick it on almost any surface by removing the back part. Some of the stickers have a slit, which means they are even easier removable from the underlaying layer.

Which production techniques do you use?

• For the production of your Stickers custom size we use the following production technique(s):
• UV-print: the printing is fulfilled with eco-friendly ink which is cured by means of UV light. This technique is also used by dentists for placing a filling. Curing ensures that the quality is clear and the colours are printed sharp.
• Latex-print: the film is printed with eco-friendly latex inks. These inks are water based and doesn't contain harmful substances. The latex film is very secure and sturdy, and will be placed on top of the material.

Which carriers are used for the delivery?

• For the delivery of your Stickers custom size we use multiple carriers. We use our most reliable carriers which in most cases are UPS or DPD.
• UPS
• Other carriers we use are DHL and even our own courier service. These carriers are used for certain products (depending on the size, the turnaround and the quantity).

I can't find the product I'm looking for. Can I request a quotation?

• 
  If your material type, weight, quantity, size or other specification is not listed, you can request a quotation. We will send you our offer within 1 working day.
• Depending on the complexity this can take a bit longer.
• The Stickers custom size that is chosen in most cases can be selected via our website.

Can Stickers custom size be pasted on any surface?

• No Stickers custom size can not be pasted on any surface. Stickers custom size are only suitable for flat surfaces such as glass, aluminium, PMMA, PC and ABS.