Sharkfin Flags

Submission specifications for Sharkfin Flags

Keep 10 mm safety margin.

Keep all important text and images at least 10 mm away from the edge of the finished size.

Keep 50 mm safety margin from the top and right.

Keep all important text and images at least 50 mm away from the right hand side and the bottom of your design. This space must be available for the hem.

Resolution of at least 150 dpi.

Make sure the resolution of the images and graphics in your artwork are at least 150 dpi.

Use CMYK as the color mode.

Prepare your files using CMYK as the color mode, not RGB. Use colormode FOGRA39 (ISO Coated v2) for coated papertypes and colormode FOGRA47 (PSO Uncoated ISO12647) for uncoated papertypes. If you are unsure of the colour mode of your file, don't worry we can always convert this for you. Keep in mind this can cause the colours to differ from the original file.

Save your files in uneditable, print-ready file formats.

Save your files in uneditable, print-ready file formats (PDF (1.4 or higher), TIFF, EPS, JPG). Deliver your files in one layer: the background layer.

Convert fonts to outlines or embed all the fonts.

Make sure you convert fonts to outlines or embed all the fonts when saving it to PDF.

Fonts should be at least 12 pt.

Fonts should be at least 12 pt.

Check your artwork on overprint.

Make sure no elements in your artwork are set on overprint. Unless you want this effect in your design. The degree of transparency in printing depends on the ink, paper, and printing method used.

Frequently Asked Questions for Sharkfin Flags

Which materials can I choose from?

• Normal Flag Material: These flags are printed on classic flag canvas with a slight glossy look. The high-quality 110gsm canvas.
• Longlife: NEW: This flagcanvas has a strong structure and is perforated with tiny holes. The holes make sure the flag can resist stong wind speeds. A longer life is guaranteed.

What is the lifespan of Sharkfin Flags?

• The lifespan of the flags is 3 to 4 months while using it intensively. You can expand the lifespan by bringing the flags inside when weather is bad.

Untill which wind power level is it advisable to hang up your flags outside?

• Our advice is to retrieve your flags inside if gale force 7 is reached. This greatly improves the lifespan of your flags.

What is the difference between the various pedestals and accessories, and how do they work?

• Metal ground spike: The metal ground spike is ideal to place your beachflag outside on soft ground, such as soil. The metal ground spike is best suited for smaller beachflags. For larger beachflags we advise to use the parasol base + rotator.
• Plastic screw base: The plastic screw base is ideal when you want to place your beachflag on softer ground such as turf or hard snow. For example in sand or on grass. The plastic screw base is also applicable for larger beachflags.
• Cross Foot (indoor): The crossfoot is a standard which is very suitable for a flat surface. The metal frame and 4 legs make sure its extra steady. The crossfoot has a size of 85 x 85 cm and is 20cm high.
• Cross foot + waterbag: The crossfoot is very suited for a flat surface. The metal frame and waterbag combined result in extra steadiness. The crossfoot has a size of 85 x 85 cm and is 20 cm high.
• Parasol base (indoor/outdoor): The parasol base with wheels is the perfect reinforcement for your beachflag. Fill the parasol base with water or sand and it will stand firmly on the ground. The base has a size of 48 x 48 cm and a weight of 1.6 KG (without sand or water).
• Parasol base + rotator: If you use your beachflag outside we recommend using this base and rotator. Now your beachflag can spin around in the parasol base. This creates extra attention and exposure!

How are the beachflags being finished?

• The beachflags are always finished on the leftside with a tunnel. On the top of the tunnel is an extra solid part so the beachflag itself does not get damaged by the flagpole.
• Beachflags made from normal flag material are finished on the right side (opposite side of where the flag tunnel is) with a hem finished with double stichting.
• Beachflags made of longlife material are finished on the right side with a ''hotcutting' method. This means the flag gets cut off and heat sealed together. This means that longlife material does not need hemming. This also expands the lifetime of your beachflag.

From which material is the flagpole made?

• The flagpoles of a beachflag are made of fiberglass. Other companies use aluminium flagpoles, however fiberglass is the better material because of its robustness and strength.

What is the diameter of the pole that comes with the flag?

• The diameter of the pole that comes with the flag is ±2cm.