Are you looking to promote your business at the beach? Look no further than our teardrop beach flags! Helloprint's eye-catching flags are the perfect way to get your brand noticed by beach goers. Not only are they highly visible, but they are also easy to set up and take down. Simply stake the flag into the ground and let the wind do the rest.
Note: By default, the tunnel band is on the left side of the print, as shown in the pictures.
| Material |
Standard flag material: Polyester Windproof material: Mesh polyester RPET 110 gsm |
| Pole | Fiberglass |
| Single-sided | Full colour | |
| Wash instructions | Machine wash at a maximum of 30°c |
| Size | 2 sizes available |
| Print technique | Sublimation |
| Weather conditions | Can withstand storms and rain. It is recommended to take inside with wind force 7 or higher. |
| Quantity | Possible to order from 1 piece |
| Transparency | 95% see through |
You can download our guides and templates in the template section. Remember to delete the template layers before exporting your design to PDF.
If you already have a design, no worries; we accept other file formats, including JPEG, PNG, or EPS.
For photographic content, high-resolution JPEGs are recommended, preferably without compression. For graphics or text-based content, we recommend print-ready, vector-based PDFs. For content that is a combination of graphics and photography, we suggest using print-ready PDFs to ensure the best quality.
Prepare your files using CMYK as the colour mode, not RGB. Use colourmode FOGRA39 (ISO Coated v2) for coated papertypes and colourmode FOGRA47 (PSO Uncoated ISO12647) for uncoated papertypes. If you are unsure of the colour mode of your file, don't worry we can always convert this for you. Keep in mind this can cause the colours to differ from the original file.
Please note: The material used for a flag is very absorbent therefore the colour can come out lighter than expected. This is especially the case with black. For rich black please use (Cyan 60, Magenta 40, Yellow 40 & Black 100).
Make sure the resolution of the images and graphics in your artwork are at least 150 dpi.
During production, there might be a slight cut deviation. To avoid any issues, we recommend the following:
For this product, the minimum font size is 20 pt. To avoid any issues, we recommend the following:
Note that we don't check spelling or typographical errors.
The lines should be at least 3 pt.
Make sure no elements in your artwork are set on overprint unless you want this effect in your design. You can read more about overprint in our Help Centre.
| Guide | |
| Teardrop flag - Small (70 x 180 cm) | PDF Indesign |
| Teardrop flag - Large (100 x 250 cm) | PDF Indesign |
Standard Flag Material: Classic 110 gsm flag canvas with a glossy look, great for advertising on busy shopping streets.
Longlife material: Strong 115 gsm fabric perforated with tiny holes. The holes make sure the flag can resist strong winds and a longer life is guaranteed. This material is best used in open areas or beaches.
Air Mesh Material: 120 gsm canvas with tiny holes for strong wind resistance, ideal for open areas and beaches.
The lifespan of the flag is approx. 3 to 5 months while using it intensively. You can expand the lifespan by bringing the flags inside in harsh weather.
We advise bringing your flags inside if gale force reaches 7. This will greatly improve the lifespan of your flags.
Metal ground spike: The metal ground spike is ideal to place your beachflag outdoors on soft but firm ground, such as soil. The metal ground spike is best suited for smaller beachflags. For larger beachflags, we advise using the parasol base + rotator.
Plastic screw base: The plastic screw base is ideal when you want to place your beachflag on soft ground such as turf or sand. The plastic screw base can also be used for larger beachflags.
Cross Foot (indoor): The crossfoot is suitable for flat surfaces. The metal frame and 4 legs make sure it's extra steady. The crossfoot measures 85cm x 85cm and is 20cm high.
Cross foot + waterbag: The crossfoot is suitable for flat surfaces. The waterbag, added to the metal frame, provides additional stability and resistance. The crossfoot measures 85cm x 85cm and is 20cm high.
Parasol base + rotator: If you intend on using your beachflag outdoors, we recommend using this base and rotator. Your beachflag can spin around in the parasol base, drawing extra attention!
Light black plate This base is made of steel and has a classic black lacquer finish, giving it a sleek and classy look. The plate has movable stabilizers, allowing it to be used on various stable surfaces. The weight of this plate is 5.4 kg and dimensions are 40 x 40 cm.
The beachflags are always finished on the leftside with a tunnel. On the top of the tunnel is an extra solid part so the beachflag itself does not get damaged by the flagpole.
Beachflags made from normal flag material are finished on the left side (opposite side of where the flag tunnel is) with a hem finished with double stitching.
Beachflags made of longlife material are finished on the left side with a lasercutting method. The flag gets cut off and heat sealed together. This means that longlife material does not need hemming and also expands the lifetime of your beachflag.
For the best set-up of your Teardrop Beachflag we recommend pulling your flag as far as possible through the flag tunnel so it's as tightly pulled as possible. This way your flag will not get creased and won't damage easily.
The diameter of the pole that comes with the flag is ±2cm.
Our flags are printed on one side as standard. This means that your logo is visible as a mirror image on the back. The print-through of our flags is around 95%.
Our flags are printed single-sided by default.
Unfortunately, this is currently not possible.
The colours printed on flag fabrics will never be as sharp as they are on your screen, especially the colour black. If you have any questions or concerns, please contact us.
Perfect for all types of events, markets, concerts or professional settings, the possibilities are endless!
• Suitable for indoor or outdoor use
• Reusable - Cost-effective marketing
• Easy to transport, for advertising on the go
• Bases suited for a number of surfaces
Standard Flag Material
Air Mesh Material
RPET Material
Stand out from the crowd with our Recycled PET material!
Offering the same characteristics and appearance as the Standard Flag material, but with many added benefits:
• Made from recycled plastic
• Less energy required to make the material
• Fewer greenhouse gases emitted during material manufacturing
Can I wash my flag?
Flags can get dirty from sand, dust, salt, or mud, which can impact their appearance. No need to worry, you can safely pop your flag into the washing machine! We advise washing with cold water, and highly recommend allowing it to air dry. This is also important to remember if your material has been in the rain. Make sure to wait for it to dry before placing it in storage.
Weather watch
While the materials are weather-resistant, they do have limits. Heavy rain or winds should prompt temporary indoor placement to maintain appearance. Short showers are fine, but prolonged exposure will have an impact. To keep your flag in top condition, we recommend shielding it from harsh weather conditions.
1. Customise your product and add to cart
Choose your desired product combination and delivery date, then add it to your cart. Take a moment to review the combination details before proceeding.
Note: Prices shown are per design. Add units individually to your cart for multiple designs.
2. Checkout
Proceed to the cart, enter the required information and confirm your order. At this stage, you can select your preferred delivery method. Remember to double-check your delivery and invoice addresses!
3. Payment & design upload
In the last step of the checkout process, you can choose to upload your design before or after making payment. Once you upload your design, it will automatically undergo our design check.
Note: If you opt to upload your design before making payment, production will only commence once the payment is processed and the design proof has been approved.
4. Design check & order approval
Your file will be checked, and we will send you a digital proof for your approval. It's important to review the proof before the time and date displayed on your order overview page to ensure that your chosen turnaround can be met.
Note: In some cases, our design team may need to review the file and provide an update via email.
You might also be interested in...
Access to 10.000+ design templates
Automatically save your designs
Easily access your designs later
New to Helloprint? Sign up or continue as guest
Save your design, never lose your design progress
Signing up only takes a minute
Easily access added designs later
Already having an account for Helloprint? Login
By signing up, you agree to our terms of service en privacy policy
Prices mentioned are per design. For multiple designs, add multiple items to your cart. In order to keep our prices economical, we offer standard quantities. Are you looking for a higher quantity? Request a quote.
Upload and approve your files before: Monday, 11 December 2023 12:30
Want to save the product for later and receive a quote?
Not ready to order yet? Get an instant quote via email to continue later or to send to your colleague or designer to order.
Air Mesh Material: 120 gsm canvas with tiny holes for strong wind resistance, ideal for open areas and beaches.
Recycled Material: 110 gsm PET material with fine structure, hemmed to prevent fraying.
Standard Flag Material: Classic 110 gsm flag canvas with a glossy look, great for advertising on busy shopping streets.
This metallic ground spike is a great accessory to use with your custom printed flags! It is constructed from steel and is perfect for displaying your brand at outdoor festivals and shows.
A high-quality plastic screw base that comes equipped with a rotating pin to keep your beachflag turning in all wind conditions. Our bases are ideal for use in soft ground, sand, grass, or clay and can be used with beachflags of any size or type!
The cross foot is a standard that is suitable for flat surfaces. The metal frame and the four legs will provide extra strength. The cross foor has a size of 85 x 85 cm (20 cm high).
Looking for some extra reinforcement of your crossfoot base? Our Waterbag is what you need! Thanks to it, your beachflag will stay still in front of light wind. Just fill it with water and add it to your cross foot base, and you're ready to take your beachflag outside!
These parasol bases can be used on both stable and unstable surfaces and are a popular option for holding flags in place. They are simple to setup and their weights can be easily increased by adding water or sand.
