Calendar 3 Month Large

To allow leeway for cutting differences in production, always add a bleed of 3 mm around all edges of your design. Make sure colours, background pictures and layouts extend into the bleed area so as to avoid leaving white lines as a result of cutting tolerances.

Keep all important text and images at least 4 mm away from the edge of the finished size.

Prepare your files using CMYK as the colour mode, not RGB. Use colourmode FOGRA39 (ISO Coated v2) for coated papertypes and colourmode FOGRA47 (PSO Uncoated ISO12647) for uncoated papertypes. If you are unsure of the colour mode of your file, don't worry we can always convert this for you. Keep in mind this can cause the colours to differ from the original file.

Make sure the resolution of the images and graphics in your artwork are at least 300 dpi.

Make sure you convert fonts to outlines or embed all the fonts when saving it to PDF.

Force Colour Images to CMYK with a 260% ink limit (in Photoshop > Convert Colour Profile > Photoshop 5 Default CMYK). Make sure the ink coverage isn't higher than 300%.

Save your files in uneditable, print-ready file formats (PDF (1.4 or higher), TIFF, EPS, JPG). Deliver your files in one layer: the background layer.

Use Rich Black (C:63% M:52% Y:51% K:100%) for larger areas and text to get a deep black colour. Do not use this value for text smaller than 15 pt or plain text. This can only be used in full colour printing. For designing black smaller texts use 100% black.

Lines should be at least 0.25 pt. Negative lines should be at least 0.5 pt.

Make sure no elements in your artwork are set on overprint unless you want this effect in your design. You can read more about overprint in our Help Centre.