Premium Trucker Cap Midocean

Submission specifications for Premium Trucker Cap Midocean

Use CMYK as the color mode.

Prepare your files using CMYK as the color mode, not RGB. Use colormode FOGRA39 (ISO Coated v2) for coated papertypes and colormode FOGRA47 (PSO Uncoated ISO12647) for uncoated papertypes. If you are unsure of the colour mode of your file, don't worry we can always convert this for you. Keep in mind this can cause the colours to differ from the original file.

Fonts should be at least 12 pt.

For textile products the fonts should be at least 12 pt.

Safety margin is not needed.

There is no safety margin needed for this product.

Bleed margin is not needed

Bleed margin is not needed.

Convert fonts to outlines or embed all the fonts.

Make sure you convert fonts to outlines or embed all the fonts when saving it to PDF.

Check your artwork on overprint.

Make sure no elements in your artwork are set on overprint. Unless you want this effect in your design. The degree of transparency in printing depends on the ink, material, and printing method used.

Frequently Asked Questions for Premium Trucker Cap Midocean

How do I have to supply my artwork?

• It is possible to supply your design files in multiple ways. The best way, for the best result, is to supply your files in Vector. If the logo consists of pantone colours, it should be saved as vector. Vector means that the design isnt made of pixels, but out of lines.

What is the imprint size?

• The imprint size for this product is 70 x 50 mm.

Can the print positions deviate from the print?

• Printing m is different from printing paper, not a single m is the same. It can be that there is a small deviation in the position of the print. This is minimal and often not visible in the final result.

What is the fastest possible turnaround?

• The fastest possible turnaround for Premium Trucker Cap Midocean is:
• 2 working days
• NOTE: only applicable for products which require your design: To make sure that your order is delivered at the indicated time, it is important that we receive your file with your design for the product, on time (also called cut-off time). In this way the product can be moved into production on time. The deadline is always communicated in the final step when putting your product together and in the box on the right which details your entire order.
• The cut-off time for your printed item may vary. This depends on the combination you choose. This has to do with the manufacturing technique and / or the order quantities.
• NOTE: The product delivery shifts a day every time the deadline for submission has passed. This is also the case if the file is rejected by us and corrected artwork isn't supplied before the next cut off time.

Which production techniques do you use?

• Digital (also called Direct-to-Garment or DTG) - with this technique, the ink is printed directly onto the product. It makes it possible to switch easily to another print per product. However, it takes quite a long time to print a product. For a limited amount (up to 50 pieces) DTG is the best technique to use. With DTG it is only possible to print full colour.

Which carriers are used for the delivery?

• For the delivery of your Premium Trucker Cap Midocean we use multiple carriers. Because of the highest reliability, in most cases we use UPS or DPD.
• UPS
• Other carriers we use are DHL and even our own courier service. These carriers are used for certain products (depending on the size, the turnaround and the quantity).

I can't find the product I'm looking for. Can I request a quotation?

• The Premium Trucker Cap Midocean that is chosen in most cases can be selected via our website.
• 
  If your material type, weight, quantity, size or other specification is not listed, you can request a quotation. We will send you our offer within 1 working day.
• Depending on the complexity this can take a bit longer.