UK

Belgium (NL) Belgium (NL)
Belgium (FR) Belgium (FR)
France France
Germany Germany
Ireland Ireland
Italy Italy
Netherlands Netherlands
Spain Spain
Sweden Sweden
United Kingdom United Kingdom
Did you not find the right product or quantity? Simply request a quote..
🤑 Best price guaranteed
🔥 500,000+ happy customers
💯 100% satisfaction
👍 Always personal help

Wall Stickers

trustpilot
4.4
Description

Need to make a big impression inside or out? Then Wall Stickers from Helloprint is for you. Made from top quality Roughmark polymer vinyl with a strong adhesive layer (high tack glue), this wall sticker is also suitable for almost any surface, including uneven ones such as exposed brick or uneven walls. If blow-dried, the material will push into and take the form of what it's stuck to. Promote your brand with your logo or colourful designs and order today!

Note: Wall Stickers can be easily removed for up to six months without leaving residue. After six months, the sticker is more difficult to remove.

  • Designed for uneven surfaces
  • Strong adhesive layer
  • Limited sizes
Product specifications
Material Roughmark polymer vinyl
Finishing No extra finishing
Matte laminated
Gloss laminated
Material thickness 89μm
Corners Straight or rounded corners
Print Full colour
Quantity Available from 1 piece
Design guidelines
We recommend using our templates and guides for preparing your print-ready PDF.

You can download our guides and templates in the template section. Remember to delete the template layers before exporting your design to PDF.

If you already have a design, no worries; we accept other file formats, including JPEG, PNG, or EPS.

For photographic content, high-resolution JPEGs are recommended, preferably without compression. For graphics or text-based content, we recommend print-ready, vector-based PDFs. For content that is a combination of graphics and photography, we suggest using print-ready PDFs to ensure the best quality.

Here you can find the customised submission specifications for contour cutting.

If you want your product to be cut to a custom shape, you will have to add it as a vector shape on top of your design. Make sure the width of the stroke is 1 pt, the colour is a 100% magenta spot and named "cutcontour". You only need to add one contour line. If you want us to adjust it for you, please send the custom shape on a separate page in the desired position.

Please note that bleed is still needed for custom shaped designs, meaning your design must go at least 5 mm past the contour cut line.

Use CMYK as the colour mode.

Prepare your files using CMYK as the colour mode, not RGB. Use colourmode FOGRA39 (ISO Coated v2). If you are unsure of the colour mode of your file, don't worry we can always convert this for you. Keep in mind this can cause the colours to differ from the original file.

Resolution of at least 150 dpi.

Make sure the resolution of the images and graphics in your artwork are at least 150 dpi.

Add 5 mm bleed and keep 10 mm safety margin

During production, there might be a slight cut deviation. To avoid any issues, we recommend the following:

  • Add a 5 mm bleed around all edges of your design.
  • Keep important elements 10 mm away from the edge or folding lines.
Text and fonts specifications (Min. font size is 12 pt)

For this product, the minimum font size is 12 pt. To avoid any issues, we recommend the following:

  • Fonts must be embedded or outlined.
  • If your design contains small black text, make sure it is 100 % black (Cyan: 0 Magenta: 0 Yellow: 0 Black: 100).

Note that we don't check spelling or typographical errors.

Lines should be at least 3 pt.

The lines should be at least 3 pt.

Check your artwork for overprint.

Make sure no elements in your artwork are set on overprint unless you want this effect in your design. You can read more about overprint in our Help Centre.

Guide PDF
Frequently asked questions
What is this product? And what can I use it for?
  • Stickers are one of our most sold products and are very popular promotional material. Stickers can be stuck on many surfaces depending on the size, material and finishing chosen. Some stickers have a slit, which means they are super easy to remove from the underlying layer.

  • This product can be used:

  • • To introduce people to your business

  • • Promote discounts or events

  • • Provide information

Can Wall Stickers be used outdoors?
  • Yes, Wall Stickers can be used outside.

What is the fastest possible turnaround?
  • The fastest possible turnaround for Wall Stickers is:

  • 2 working days

  • Offset: 10 working days

  • Please note: Only applicable for products which require your design: To make sure that your order is delivered at the indicated time, it is important that we receive your file with your design for the product, on time (also called cut-off time). This way, the product can be moved into production on time. The deadline is always communicated at the final step when putting your product together and in the box on the right which details your entire order.

  • The cut-off time for your printed item may vary. This depends on the combination you choose. This has to do with the manufacturing technique and / or the order quantities.

  • Please note: The product delivery shifts a day every time the deadline for submission has passed. This is also the case if the file is rejected by us and corrected artwork isn't supplied before the next cut-off time.

Which production techniques do we use?
  • For the production of Wall Stickers, we use the following technique(s):

  • Digital printing: Uses four colours (CMYK) with toners and inks to print digital files. This option is comparable to a large home printer, and is cheaper than Litho printing for smaller quantities. This is because there are fewer starting costs, fewer components involved, and no ink drying time required.


  • Offset Lithography/Litho printing: This technique uses wet ink and aluminium and rubber plates to transfer images and text onto paper sheets, resulting in sharp, vibrant, and consistent prints. While this method may require slightly more setup than digital printing, it's the most cost-effective option for larger print runs.


  • Please note that this product is lasercut, which can shrink the foil material slightly and give you a white border on the edge of each sticker.

Which carriers are used for the delivery?
  • For the delivery of Wall Stickers, we use our most reliable carriers which, in most cases, are UPS or DPD.

  • We also use DHL and our own courier service. However, these carriers are only used for certain products (depending on the size, the turnaround and the quantity).

  • Depending on the complexity, this can take a bit longer.

Are stickers delivered on a square sheet format or round sheet format?
  • While your stickers might have a round shape, they could be delivered on a square format or a round sheet format. For production reasons, we cannot guarantee that the backing sheet will match the shape of the stickers.

Ordering process
Ordering with own design
Choose and configure: Choose the product, select your preferences and your desired delivery time.

Add to cart: Add to cart, review your preferences and edit/duplicate if needed. We recommend opting for Premium Artwork Check.

Checkout: Choose the delivery and invoice address.

Payment & design: Choose your preferred payment method in this step. You can also choose to upload your artwork first and pay at a later stage.

Design check: Upload your design. We'll send a digital proof for your approval before the order gets sent to production.

Sit back and relax!
Using editor design
Choose and configure: Find the best product for you, configure it and choose your delivery time.*

Design in the editor: Now you can upload and edit your artwork, if necessary, with the help of our editors. From here, you can add your product(s) to the cart.

Checkout: Choose the delivery and invoice address.

Payment: Choose your preferred payment method in this step.

Design check: We'll send a digital proof for your approval before the order gets sent to production.

Sit back and relax!

Our ordering process

1. Customise your product and add to cart

1. Customise your product and add to cart

Choose your desired product combination and delivery date, then add it to your cart. Take a moment to review the combination details before proceeding.

Note: Prices shown are per design. Add units individually to your cart for multiple designs.

2. Checkout

2. Checkout

Proceed to the cart, enter the required information and confirm your order. At this stage, you can select your preferred delivery method. Remember to double-check your delivery and invoice addresses!

3. Payment & design upload

3. Payment & design upload

In the last step of the checkout process, you can choose to upload your design before or after making payment. Once you upload your design, it will automatically undergo our design check.

Note: If you opt to upload your design before making payment, production will only commence once the payment is processed and the design proof has been approved.

4. Design check & order approval

4. Design check & order approval

Your file will be checked, and we will send you a digital proof for your approval. It's important to review the proof before the time and date displayed on your order overview page to ensure that your chosen turnaround can be met.

Note: In some cases, our design team may need to review the file and provide an update via email.

Shape: Round

Print run

Prices mentioned are per design. For multiple designs, add multiple items to your cart. In order to keep our prices economical, we offer standard quantities. Are you looking for a higher quantity? Request a quote.

Show more

Estimated delivery date

Upload and approve your files before: Monday, 22 April 2024 11:00

£38.99 Excl. VAT

Want to save the product for later and receive a quote?

Not ready to order yet? Get an instant quote via email to continue later or to send to your colleague or designer to order.

Your quote has been sent!

Your quote has been sent!

You will receive the product details within a minute. Take your time to consider it and come back to order with us!

Shape

Size

What finishes can I choose for my ?

    • Matte lamination

      A non-reflective, smooth finish that reduces glare and adds a subtle, sophisticated touch to your stickers. Perfect for a modern and understated appearance.

    • Gloss lamination

      A shiny finish that enhances colors, providing a vibrant and polished look to your stickers. Ideal for adding a glossy, reflective sheen.

Print run

Delivery