Spiral Bound Booklet Printing

You can download our guides and templates in the template section. Remember to delete the template layers before exporting your design to PDF.

If you already have a design, no worries; we accept other file formats, including JPEG, PNG, or EPS.

For photographic content, high-resolution JPEGs are recommended, preferably without compression. For graphics or text-based content, we recommend print-ready, vector-based PDFs. For content that is a combination of graphics and photography, we suggest using print-ready PDFs to ensure the best quality.

Prepare your files using CMYK as the colour mode, not RGB. Use colourmode FOGRA39 (ISO Coated v2) for coated papertypes and colourmode FOGRA47 (PSO Uncoated ISO12647) for uncoated papertypes. If you are unsure of the colour mode of your file, don't worry we can always convert this for you. Keep in mind this can cause the colours to differ from the original file.

Make sure the resolution of the images and graphics in your artwork are at least 300 dpi.

To allow leeway for cutting differences in production, always add a bleed of 3 mm around all edges of your design. Make sure colours, background pictures and layouts extend into the bleed area so as to avoid leaving white lines as a result of cutting tolerances.

For this product we need all important text and images to be at least 11 mm away from the wire. That means you should deliver your artwork with 11 mm margin on the left for odd pages, and 11 mm margin on the right for even pages. For top, bottom and opposite side of the wire keep all important text and images at least 4 mm away from the edge of the finished size.

For this product, the minimum font size is 6 pt. To avoid any issues, we recommend the following:

• Fonts must be embedded or outlined.
• If your design contains small black text, make sure it is 100 % black (Cyan: 0 Magenta: 0 Yellow: 0 Black: 100).

Note that we don't check spelling or typographical errors.

Lines should be at least 0.25 pt. Negative lines should be at least 0.5 pt.

Make sure no elements in your artwork are set on overprint unless you want this effect in your design. You can read more about overprint in our Help Centre.

Force Colour Images to CMYK with a 260% ink limit (in Photoshop > Convert Colour Profile > Photoshop 5 Default CMYK). Make sure the ink coverage isn't higher than 300%.